GGD type AC low voltage distribution cabinet
The GGD type AC low-voltage distribution cabinet is suitable for AC 50Hz power distribution systems of power plants, substations, industrial and mining enterprises, etc., with a rated operating voltage of 380V and a rated operating current of 5000A, for the conversion, distribution and control of power, lighting and distribution equipment.
Quality Assurance
Well made
Worry-free after-sales service
Quality Assurance
Classification:
High and low voltage switchgear
Tel:0371-63719330
Product Introduction
GGD type AC low-voltage power distribution cabinet is suitable for power users such as power plants, substations, industrial and mining enterprises, in power distribution systems with AC 50Hz, rated working voltage of 380V and rated working current of 5000A, for the energy conversion, distribution and control of power, lighting and power distribution equipment.
The product features high breaking capacity, good dynamic and thermal stability, flexible electrical schemes, convenient combination, strong practicability, novel structure and high protection degree. It can be used as an updated replacement product of low-voltage switchgear and controlgear assemblies.
GGD type AC low-voltage power distribution cabinet complies with standards such as IEC439 (Low-voltage switchgear and controlgear assemblies) and GB7251 (Low-voltage switchgear assemblies).

Normal Operating Environment
◆The ambient air temperature shall not be higher than +40℃ or lower than -5℃. The average temperature within 24h shall not be higher than +35℃.
◆For indoor installation and use; the altitude of the installation site shall not exceed 2000m.
◆The relative humidity of the surrounding air shall not exceed 50% at the maximum temperature of +40℃, while a higher relative humidity is permissible at lower temperatures (e.g. 90% at +20℃). The possible occasional condensation caused by temperature variation shall be taken into account.
◆The inclination of the equipment from the vertical plane during installation shall not exceed 5°.
◆The equipment shall be installed in a place free from severe vibration and shock and from corrosive atmosphere that may cause corrosion to electrical components.
◆Special requirements of users shall be settled through consultation with the manufacturer.



Tag:
Related products
Related products
Product Inquiry